Application and Use Instructions for Product:
# 4100 Staticide Static Dissipative Restorer/Cleaner

1. Dust mop area to be cleaned - dilute #4100 (10 parts water to 1 part restorer).

2. Thoroughly mix concentrate. Using a clean mop (rayon map recommended or cotton mop if soaked in cool water for 24 hours to remove lint particles).

3. Fully saturate mop, wring out excess cleaner and apply thin coat to floor. Do not wet mop floor after application.

4. Check floor resistivity - apply a second coat of #4100 if necessary.

5. If desired, buff floor with white pad for a high gloss finish.

6. Allow floor to dry for 1 hour before resuming traffic.