< Previous10 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ESD WORKBENCH Resistant to abrasion and chemicals »Temperature range: 40°F to 225°F (5°C – 107°C) »Conductive: less than 10 6 ohms RTT, RTG, Vol R »RoHS3, REACH compliant Product #972015: 20” x 15” x 1” Product #972618: 26” x 18” x 1” ACL’s ground cords connect dissipative mat materials to an earth grounding point. Suitable to use with static dissipative matting materials that have a 10mm female snap installed, each style comes equipped with 10’ coated high-strength tensile wire, 10mm male stud, and 1 megohm resistor. ACL’s conductive trays provide ESD protection for static-sensitive electronic components during handling and transportation. Stackable and durable, they have excellent abrasion resistance and can withstand chemical damage. Made from smooth fiberglass polypropylene with conductive additives, these trays will not outgas or lose electrical properties even after washing. Meeting both ANSI/ESD S20.20 and European IEC 613450-5-1 guidelines, electrical components and assemblies can be transported safely. #8090 Mat Ground Cord #8091 Common Point Ground #8092 Bench Mount #8094 Universal Grounding Cord Snap Fastener Kit GROUNDING HARDWARE STATICIDE ® CONDUCTIVE TRAYS #8090 #8091 #8092 #8094 #8010PK / #8025PK Simple and clean connection between mat and ground source 10mm male stud built into low profile, dome-style molded head Equipped with two banana jack plug-ins Ideal for wrist straps, meters, and constant monitors Attaches under workstations Provides wrist strap parking system with two banana jacks Includes 10mm female socket and eyelet Attaches ground cords with 10mm male stud #8010PK includes 10 pairs #8025PK includes 25 pairs All-purpose ground cord with four ground point adapters Includes alligator clip, terminal lug, 10mm stud-to-socket stack snap, extra 10mm stud-stack snap Equipped with 10’ heavy-duty cable, 1-meg resistor, and banana-to-10mm socket #972015 #97261811 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ESD WORKBENCH Eliminates unsightly film or other residue that may build up on static-sensitive areas Maintains original surface resistivity of anti-static mats and workbenches Cleans, rejuvenates, and extends the life of ESD mats Contains no alkali or ammonia Designed for production areas including assembly, testing, and spaces where sensitive electronic components are handled ACL’s popular anti-static, non-abrasive cleaner can be applied on just about any surface. Leaving no film, it is ideal for general use on workstations, tabletops, and anti-static mats. Without degrading anti-static properties, this non-streaking, non-flammable cleaner effectively removes flux residues, oily finger marks, grease, nicotine, dirt, grime, and inorganic contaminants. MAT & TABLE TOP CLEANER Product #6001S: 2oz bottle / 24 per case (includes finger pump) Product #6001: Quart bottle / 12 per case (includes trigger sprayer) Product #6002: Gallon bottle / 4 gallons per case Product #6001-5: 5-gallon pail Product #6001-2: 50-gallon drum #6002 / #6001 #5075 These roomy, single-layer polyethylene, anti-static trash can liners are humidity independent and amine-free. The average resistance of the liners is 1010 ohms. Static decay rate is less than two seconds per Mil-B- 81705D Type II-Federal test method 101C method 4046. Medium liners fit in 11-gallon containers (#5075 Wastebasket) Medium-size liner thickness: 1.5 mil »Extra-large liners fit in 40 to 45-gallon containers Extra-large liner thickness: 2 mil ANTI-STATIC WASTEBASKET LINERS Product #5076: Medium 24” x 36” Pink liner / 50 bags per case Product #5076B: Medium 24” x 36” Black liner / 50 bags per case Product #5078: Extra-Large 40” x 46” Pink liner / 25 bags per case Product #5078C: Extra-Large 40” x 46” Pink liner / 100 bags per case Size: 13” diameter x 21.75” high (11 gallons) Non-outgassing Permanently dissipative Safe to use in solvent areas Cleanroom and environmentally safe This static dissipative, high-impact, non-black container is made of a high-density polyethylene. It contains no carbon, dyes, or additives, making it ideal for all applications demanding cleanliness. This container will not tribogenerate static. The wastebasket is ideal for cleanrooms, manufacturing, inspection, quality control, and research industries. The container may be used alone or with ACL’s wastebasket liners. STATICIDE ® ESD STATIC DISSIPATIVE WASTEBASKET Product #5075: 11-gallon wastebasket / 5 wastebaskets per case #5076 #5076B12 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ESD WEARABLES Powder-free / ISO 5 / Class 100 Cleanroom 70LA 10 10 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method 80LA 10 7 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method Available in sizes small, medium, large, and extra large Powder-free / ISO 5 / Class 100 Cleanroom 10 9 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method 3 mil thickness Available in sizes small, medium, large, and extra large Powder-free / ISO 5 / Class 100 Cleanroom Consistently low particulates and extractible ion levels 10 9 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method 6 mil thickness Available in sizes small, medium, large, extra large, and double extra large. Blended nylon-conductive carbon yarn Low moisture absorption GLK 10 7 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method GLKT (with tips) 10 8 ohms RGP as per ANSI-ESD SP15.1 when using CAFE method 6 mil thickness For economical static protection, ACL’s Latex ESD Finger Cots protect boards from ESD and contaminants such as skin salts, oils, and particulates. While anti-static pink latex is commonly recognized for being effective for static control, black latex offers added security for those specifying mid-range static dissipation. Washed and powder-free, the inherent elasticity of latex allows for a comfortable fit that is easy to wear. ACL’s Nitrile ESD Finger Cots take the worry away for those with latex allergy issues while offering protection against skin and oil contamination. Since nitrile is resistant to many chemicals, it will not dissolve under chemical contact. The inherently anti-static nature of nitrile also offers natural static control without carbon shedding. For EPAs where cleanliness is a concern, blue does not expose as much handling soils. For companies using both non- ESD and ESD finger cots, ACL offers white finger cots to differentiate ESD protection. ACL’s Nitrile ESD Gloves safeguard against damage caused by static discharge and contamination. The inherently anti-static nature of nitrile also offers natural static control without carbon shedding. For EPAs where cleanliness is a concern, these disposable gloves are manufactured without plasticizers, silicone, or powders. ACL’s Knit ESD Gloves protect against static discharge without sacrificing ergonomic performance making them ideal for detailed assembly and inspection work. This washable and reusable, seamless-knit constructed glove is available with and without polyurethane fingertips. LATEX ESD FINGER COTS NITRILE ESD FINGER COTS NITRILE ESD GLOVES KNIT ESD GLOVES Product #70LA: Pink; 720 cots per pack Product #80LA: Black; 720 cots per pack Product #90NI: White; 720 cots per pack Product #100NI: Blue; 720 cots per pack Product #GL9NI: 100 individual 9” gloves per pack; 5 packs per case Product #GL12NI: 100 individual 12” gloves per pack; 5 packs per case Product #GLK: 6 pairs per pack; 6 packs per case Product #GLKT: with tips; 6 pairs per pack; 6 packs per case #70LA #90NI #GL9NI / #GL12NI #GLKT #80LA #100NI13 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ESD WEARABLES ACL’S Adjustable wrist straps offer comfortable and secure personal grounding for working on electronics in EPAs. Once connected to ground, they provide a safe path for eliminating static charges. Each strap is equipped with a flip and grip buckle for secure adjustments. Wrist straps are available in four models for various short- and longer-term applications and special environments, including military defense. The premium model offers a double thick strap to ensure outer layer insulation. The hypoallergenic model features a flat plastic cover to prevent allergic reactions. All wrist straps are RoHS compliant, designed to use with ACL cords, and sold in packs of six. WRIST STRAPS #8111 Economy Wrist Strap Recommended for occasional wear 5 rows of double-stitched silver yarn 1.5mm band thickness; flat buckle back Dark blue #8113 Premium Wrist Strap Recommended for all-day wear 10 rows of micro-threaded silver yarn 2.5mm band thickness for comfort and security; curved buckle back Light blue #8115 Hypoallergenic Wrist Strap Recommended for all-day wear 10 rows of micro-threaded silver yarn 2.5mm band thickness for comfort, security, and contact Flat plastic buckle back for allergy protection Light blue #8116 Camouflage Wrist Strap Recommended for military contractors 16 rows of silver yarn 2mm band thickness; curved buckle back Camouflage #8101 Economy Wrist Strap Cord Lightweight Recommended for use with ACL Wrist Strap #8111 4mm Socket-to-Banana Includes alligator clip 6’ cord with 1-meg ohm resistor Dark blue #8107 Premium Wrist Strap Cord Heavy Duty Recommended for use with ACL Wrist Straps #8113, #8115, or #8116 4mm Socket-to-Banana Includes alligator clip 6’ cord with 1-meg ohm resistor Black #8111 #8113 #8115 #8116 #8101 #810714 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ESD WEARABLES Static dissipative No glycerin, silicone, lanolin, or mineral oil Improve wrist strap performance Fragrance-free Replenish the vital moisture on skin that is important to wrist strap performance. This static dissipative hand lotion is equipped to prevent and handle static discharge, especially in the electronics industry. Hi Tech Hand Lotion helps keep the skin moistened without risk of contamination. Hi Tech Hand Lotion also complies with DOD 1686A and DOD HDBK 263. STATICIDE ® HI TECH HAND LOTION Product #7001S: 2oz squeeze tube / 24 tubes per case Product #7001: 8oz squeeze tube / 24 tubes per case Product #7016: 16oz bottle (pump top) / 12 bottles per case Product #7002: Gallon bottle (pump top) / 4 gallons per case #7001 / #7002 / #7016 ACL’s Heel Grounders are ideal for personal grounding protection in ESD Protected Areas. These exceptionally durable, cup-style heel grounders are effective in providing a continuous path-to- ground between individuals and ESD-protected flooring. Easy to use and comfortable to wear, heel grounders are available in economy and premium models and fit most shoes and shoe sizes. They are sold six per pack. The Disposable Heel Strap is optimal for one-time use. HEEL GROUNDERS AND HEEL STRAPS #8120 #8122 #8124 #8120 Economy Heel Grounder 1” form-fitting red elastic garter attached to two-layer rubber sole Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1 Black conductive exterior – 10 4 ohms; white insulative interior 1-meg ohm resistor Conductive ground ribbon measuring 14.5”x .05” Plastic parts comprised of anti-static nylon material Hook and loop system with D-ring tie-down 11”x 3/4” #8122 Premium Heel Grounder 1 3/8” two-layer rubber heel cup reinforced with stainless steel rivets for added conductivity, strength, and longevity Free of corrosion or rust when submerged 24 hours in saltwater Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1 Black conductive exterior – 10 4 ohms; white insulative interior 1-meg ohm resistor Conductive ground ribbon measuring 14.5”x .05” Plastic parts comprised of anti-static nylon material Hook and loop system Left side velour fabric strap 8”x 3/4” Right side nylon crochet strap 5”x 3/4” 1” black elastic fabric garter #8124 Disposable Heel Strap Economical solution for plant visitors and temporary workers Ideal for one-time use Anti-static, nonwoven fabric with conductive yarn for continuous path-to-ground High-strength adhesive prevents slippage Yellow and black 99% polyester, 1% conductive yarn Compliant with ANSI/ESD S20.20 and IEC 61340-5-1 Resistance: 10 5 ohms RoHS compliant 100 per pack(800) 782-8420 (847) 981-9212 www.aclstaticide.com 15 STATIC CONTROL FLOORING This carbon-loaded, water-based polyurethane coating dissipates static discharge for cost-effec- tive static control. Designed for interior concrete floors and unfinished surfaces, this ESD paint is perfectly suited for EPA manufacturing areas, static-controlled workspaces, data centers, ware- houses, and creating Faraday cages. Use ACL 10R Primer as a sealer for concrete before applying the 4700-SS Diamond ESD Paint. This non-toxic primer dries clear and is ready-to-use. It provides enduring protection against water penetration damage on unsealed concrete. Made in the USA. Dark gray with satin sheen Static dissipative: 10 5 –10 8 ohms when tested according to ANSI/ESD STM7.1 Appropriate for facilities following ANSI/ESD S20.20 Product #4700-SS1: Gallon pail Product #4700-SS5: 5-gallon pail Product #ACL 10R-1: Sealer/Primer: Gallon pail Product #ACL 10R-5: Sealer/Primer: 5-gallon pail Product #8095: Grounding Strips: 2” x 12” (1.4 mil thickness) Product #6700: Gallon pail Product #6700: 5-gallon pail See website for colors and part numbers Neutral Cleaner Concentrate - Dilution ratio: 1:128 (1 part cleaner to 128 parts water) Product #4020-1: Gallon bottle / 4 gallons per case Product #4020-5: 5-gallon pail Product #4020-2: 54-gallon drum Neutral Cleaner Ready-to Use Product #4030-1: Gallon bottle / 4 gallons per case Product #4030-5: 5-gallon pail Product #4030-2: 54-gallon drum This water-based acrylic vinyl coating is available in dissipative or conductive resistances. Suitable for interior concrete floors, walls, and metal and wood surfaces. Color options allow for demarcating ESD work areas and for specific applications. Made in the USA. Various colors available with flat matte finish Static dissipative: 10 5 –10 8 ohms when tested according to ANSI/ESD STM7.1 Static conductive: 10 3 –10 6 ohms when tested according to ANSI/ESD STM7.1 Appropriate for facilities following ANSI/ESD S20.20 These anti-static cleaners are low-foaming and produce constant detergency. They can be used in all facilities, as they leave no film or streaks, and are safe for septic and sewage systems. Anti-static properties of the production environment will not be degraded with these non-abrasive cleaners. Made in the USA. For use on concrete, ESD tile, and painted floors Ideal for maintaining ESD paint Available in concentrate and ready-to-use 4700-SS STATICIDE ® DIAMOND ESD PAINT #4700-SS #6700 #4020 / #4030 6700 ESD VINYL PAINT PLUS NEUTRAL CLEANERS16 (800) 782-8420 (847) 981-9212 www.aclstaticide.com #4800 Coverage: 1500 - 2000 sq. ft. per gallon (approximately) VOC less than 4% #4800 Solids: 21% ± 5% Adheres to ESD tile Enhanced abrasion performance Strip cycle: 12 - 18 months Suitable to use on concrete, epoxy, ESD epoxy, and dissipative tile Resistance RTT per ANSI/ESD STM 7.1: 10 7 –10 9 ohms average Product #4800-1: Gallon bottle / 4 gallons per case Product #4800-5: 5-gallon pail Product #4800-2: 54-gallon drum Advanced acrylic polymer allows superior adhesion and static control for out-of-warranty ESD floors and other special surfaces. It does not yellow or flake and is tough to scuff. This long-life floor finish will revitalize shine and electrical properties of old ESD tile. Made in the USA. 4800 STATICIDE ® ULTRA II No other ESD floor finish can match Staticide Ultra for electrical properties, physical longevity, and gloss. Staticide Ultra utilizes the latest technology in static dissipative polymers that act on a molecular level. This enhances its static control ability and effectiveness and maximizes the strip- ping cycles. Made in the USA. Product #4600-1: Gallon bottle / 4 gallons per case Product #4600-5: 5-gallon pail Product #4600-2: 54-gallon drum Coverage: 1500 - 2000 sq. ft. per gallon (approximately) VOC less than 4% #4600 Solids : 22% ± 5% Provides superior abrasion performance Dries faster and with higher gloss intensity than other ESD finishes UL listed for slip resistance Strip cycle: 12 - 24 months Suitable to use on vinyl, linoleum, and ceramic tile Resistance RTT per ANSI/ESD STM 7.1: 10 7 –10 9 ohms average Staticide Acrylic is a high-solids, low-cost method of protecting your sensitive manufacturing areas from the dangers of static buildup. It is ideal for production areas, warehousing, shipping, laboratories, and electronic repair facilities. Made in the USA. Product #4000-1: Gallon bottle / 4 gallons per case Product #4000-5: 5-gallon pail Product #4000-2: 54-gallon drum Coverage: 1500 - 2000 sq. ft. per gallon (approximately) VOC less than 4% #4000 Solids: 20% ± 5% Competitively priced UL listed for slip resistance Strip cycle: 6 - 12 months Suitable to use on vinyl, linoleum, and ceramic tile Resistance RTT per ANSI/ESD STM 7.1: 10 8 –10 9 ohms average STATIC CONTROL FLOORING 4600 STATICIDE ® ULTRA 4000 STATICIDE ® ACRYLIC #4600 #400017 (800) 782-8420 (847) 981-9212 www.aclstaticide.com Coverage: 1000 - 1500 sq. ft. per gallon (approximately) Static Dissipative: 10 7 –10 9 ohms average @ 100 volts Dilution ratio: 1:10 (1 part cleaner to 10 parts water) Solids: 25% Low odor Suitable for heavy-duty cleaning on Staticide static dissipative floor finishes and dissipative tile Product #4100-1: Gallon bottle / 4 gallons per case Product #4100-5: 5-gallon pail Product #4100-2: 54-gallon drum Staticide Restorer Cleaner renews gloss and prolongs strip cycles on dissipative floor finishes. Using a special conductive ingredient, Staticide Restorer cleans while simultaneously breaking down electrical discharge. This non-abrasive, biodegradable formula does not contain harmful chemicals like ammonia, phosphates, or alkali. It is tough enough to remove black heel marks, yet gentle enough to return floors to safe specifications. Made in the USA. Staticide Anti-Static Stripper provides a completely clean and finish-ready surface by emulsifying dirt and residual particles of old wax or coating. Effective in hard or soft water, this biodegradable, low-foaming formula removes multiple coats of wax, synthetic floor finishes, and embedded dirt without damaging or dulling floors. Made in the USA. Coverage: 5000 sq. ft. per gallon (approximately) Dilution ratio: 1:4 (1 part stripper to 4 parts water) Non-toxic Biodegradable Product #4010-1: Gallon bottle / 4 gallons per case Product #4010-5: 5-gallon pail Product #4010-2: 54-gallon drum 4100 STATICIDE ® RESTORER CLEANER 4010 STATICIDE ® ANTI-STATIC STRIPPER #4010 #4100 STATIC CONTROL FLOORING #6800 ACL’s Conductive Chair Mat is made from an engineered PVC with inherent electrical properties that will last the lifetime of the mat. The homogeneous distribution of carbon black and proprietary polymers give this conductive thermoplastic vinyl a continuous and permanent path to ground. Electrical properties are impervious to damage caused by moving furniture, so the conductive circuit remains unbroken while guarding against scratching and scuff marks. Made in the USA. Resistance measures 10 3 –10 6 ohms per ANSI/ESD S7.1-2005 Electricals are warranted for the lifetime of the mat Compliant to ANSI/ESD S20.20 Single layer, stippled surface .090” (2.29mm) thickness Recyclable CONDUCTIVE CHAIR MAT AND FLOOR RUNNERS Product #6800: 46” x .090” x 50” Black Product #6836: 36” x .094” x 75’ Black Product #6848: 48” x .094” x 75’ Black18 (800) 782-8420 (847) 981-9212 www.aclstaticide.com STATIC CONTROL INSTRUMENTS Alphanumeric LCD scale shows precise value Resistance range: 10 3 –10 12 ohms Ideal for testing according to ESDA test methods Includes tester, two 5-lb electrodes, heavy-duty shielding cables, carrying case, and calibra- tion certificate Powered by 9-volt alkaline battery Accuracy: 10 3 –10 10 ohms: < ± 2%, ± 2 counts 10 11 –10 12 ohms: < ± 10%, ± 4 counts Made in the USA The ACL 880 Digital Megohmmeter is a highly accurate and dependable audit kit that is designed to test static dissipative surfaces for electrical resistance according to industry standards. Point- to-point (RTT) and resistance-to-ground (RTG) tests are easy to perform with the calibrated 5-lb powder-coated electrodes. Unlike analog meters with LEDs, test results are shown in actual precise numeric value rather than decade value in logarithmic scale. ACL 880 MEGOHMMETER TEST KIT The ACL 395 handheld meter features sophisticated circuitry that allows for the same advantages as megohmmeters, but at an economical price. Utilizing color-coded zones, the LED logarithmic scale is easy to read and evaluate. Half decades indicate where the measurement value falls within the decade giving a closer indication to actual value. The ACL 395 features rubber rails for supe- rior contact. Economical and lightweight, this indicator is perfect for packaging and assembly line assurance checks. When optional 5-lb probes are used, this audit kit complies with IEC 61340-4-1, ANSI/ESD STM 4.1 and ANSI/ESD STM 7.1 for resistance-to-ground (RTG) and point-to-point (RTT) testing making it ideal for spot checking and auditing in material production and laboratories. Color LED display segments (including warning stage) Half decades for greater accuracy Rails: conductive rubber Dimensions: 2.8” x 5.1” x 1.4” Uses parallel bar electrodes as defined in ASTM D257 Includes calibration certificate ACL 395 SURFACE RESISTANCE METER ACL 396 Accessory Kit for ACL 395 External probes meet industry standards for testing resistance point-to-point (RTT) and volume resistance. Includes foam-lined carrying case, two 5-lb probes, and test leads. ACL 800 DIGITAL MEGOHMMETER The ACL 800 is ideal for measuring the resistance of packaging, smocks, anti-static mats, work surfaces, and flooring. Built-in electrodes can be used for quick checks on ESD mats. External probes can be used for testing in accordance with ESDA standards requiring 5-lb probes, such as STM 4.1 and STM 7.1, European Standards IEC 61340-4-1, 61940-2-3, and 61340-4-5. Kits include two 5-lb probes, test leads, and a foam-lined carrying case. Measurement range for 10v resistance: 103–106 ohms Measurement range for 100v resistance: 10 4 –10 12 ohms Measures relative humidity: 10% to 90% RH Measures temperature: 32°F to 100°F (0°C to 37.7°C - also available in Celsius) Includes internal test probes for testing STM11.11 and ASTM D-257 Weight: 14 lbs Kit size: 15” x 4” x 12” Accuracy: 10 3 –10 8 ohms = ± 10% #ACL 395 #880 #80019 (800) 782-8420 (847) 981-9212 www.aclstaticide.com ACL 255 RESISTANCE PROBES ACL 806 and ACL 807 PEN PROBES Made in accordance with ANSI/ESD STM 4.1, ACL’s 5-lb electrodes come equipped with conductive rubber pads for superior contact. Attached handle allows for easy toting. Machined steel is drilled to accommodate 4mm banana jack cables. These are the same high quality electrodes included with the ACL 880, ACL 800, and ACL 396 kits. Diameter: 2.5” Powder-coated for rust prevention Made in the USA The small size of ACL’s accessory pen probes is ideal for measurements in hard-to-reach areas where 5-lb probes do not fit. They are compatible with the ACL 395 and ACL 800 meters. The portability and comfortable ergonomic design allow the user to test specimens in the field and laboratory Spring-loaded electrodes with conductive rubber boots Includes BNC coaxial cable and stereo jack adapter ACL 806 conforms to ANSI/ESD STM11.13-2006 ACL 807 conforms to ANSI/ESD STM11.11-2006 and ANSI/ESD STM11.12-2006 Made in the USA #ACL 255 #ACL 806 ACL’s digital field meter is ideal for locating static problems in machinery and ionized environments. It indicates actual voltage from 0 - 20,000 volts at 1” away from charged surfaces. Results are displayed on a 3.5 digit LCD with polarity. Equipped with “Measure/Hold” button Chopper stabilized Test range at 1” away from target: 0 ± 20kV in 100v increments Pulsing eye indicator Ideal to use when precise measurements are needed Size: 4 1/4” x 2 3/8” x 7/8” ACL 450B DIGITAL STATIC LOCATOR #ACL 450B STATIC CONTROL INSTRUMENTS Product #ACL 806: Dual Point Pen Probe measures areas 0.32” (8.2mm) diameter Product #ACL 807: Concentric Point Pen Probe measures areas 0.35” (8.89mm) diameter As a standalone unit, the ACL 306 handheld Two-Point Resistance Checker offers an all-in-one solution for those requiring resistance readings in small areas but do not want to encumber themselves with added wires or a megohmmeter. Portable and lightweight, this indicator is perfect for testing ESD packaging with nooks and recesses or any part on the assembly line that is too small for 5-lb electrodes. The metal spring-loaded pins may be used with or without conductive rubber boots. The LED logarithmic scale is quick and easy to read and evaluate. Color LED display segments Measuring range: 10 3 - 10 12 ohms Measures 0.5” wide Conductive pogo pins Dimensions: 2.8” x 5.1” x 1.4” Made in USA Includes calibration certificate ACL 306 TWO-POINT RESISTANCE CHECKER #ACL 306Next >