Biodegradable, Low-Foaming Formula
ACL Staticide® Stripper 4010 Acrylic Floor Finish Remover provides a completely clean and finish-ready surface for Staticide® Floor Finishes. Effective in hard or soft water, this biodegradable, low-foaming formula emulsifies and removes multiple coats of floor finishes and embedded dirt without damaging or dulling floors. When used at proper dilutions, Staticide® Stripper is pH-balanced so that neutral cleaning is not necessary.
This low odor, solvent-safe surfactant solution is less corrosive than other commercial strippers and is formulated without the use of environmental pollutants common in other cleaners and strippers. It is safe to use on a variety of surfaces including linoleum, vinyl tiles, and concrete. Staticide® Stripper 4010 Acrylic Floor Finish Remover will not damage or dull flooring when used according manufacturer’s recommendations.
Sweep floor with an untreated dry mop. Dilute Staticide® Stripper 4010 Acrylic Floor Finish Remover 1:4 (stripper to water). Using a clean lint-free mop, wet floor and reapply as needed in order to keep floor wet for 10-15 minutes.
Scrub floor with an abrasive pad to emulsify old finish and dirt. Pick up soiled solution with a wet vacuum or mop. Rinse floor thoroughly with water until stripper is completely removed.
Dry floor thoroughly before the application of a Staticide® Floor Finish.