Staticide® Mighty Mask

Peelable Solder Masking Agent

Staticide® Mighty Mask is a fast curing, temporary masking agent designed for a variety of electronics manufacturing applications. It safeguards component-free areas on PCBs during soldering and on components during conformal coating processes.

A special heat-resistant compound is added to the latex to provide short-term, high-temperature protection which makes it ideal for temperature-sensitive components in hand and wave soldering. A 10mil coat of Mighty Mask cures in approximately 3 hours at room temperature and in about 1 hour at 160F.

This plastic-safe, peelable solder mask removes easily by hand or with tweezers without leaving contaminating or corrosive residues. It is compatible with all cleaning solvents and flux types.

Please be aware of extended lead times during winter.

ACL only ships Staticide® Mighty Mask on Mondays and Tuesdays during the winter months due to limited freeze cycles. In cases of extreme temperature and weather patterns, a shipping halt may occur.

Ideal for the following applications:

  • Component-free areas for wave soldering
  • Pin connectors during soldering
  • Temperature-sensitive components during wave soldering
  • Board areas from conformal coating

FEATURES:

  • Compatible with rosin, lead-free, and water-soluble fluxes
  • Dries fast; peels off easily
  • Leaves no residue or contaminants
  • Non-corrosive and safe for metals
  • RoHS compliant
  • Made in USA
Mighty Mask Duo

Directions:

Shake well before using. Solder mask can be applied by hand with a spatula or with the supplied squeeze bottle. Thickness should be between 10 mils. Cover pre-tinned sections and through-holes evenly.

 

Staticide® Mighty Mask will be tack-free and completely cured in one hour at 160°F or three hours in ambient temperatures. High humidity environments may extend cure time.

 

Staticide® Mighty Mask is easily removed by hand or with tweezers. Leaves no residue.

 

For industrial use only. Do not freeze. Read SDS carefully prior to use.

 

Compatibility:

Staticide® Mighty Mask is generally compatible with most materials used in the electronics industry and PCB manufacturing. As with any solder masking agent, compatibility with the substrate must be tested on a non-critical area prior to use.

Product Variants / Unit Sizes:

  • Product #8691: 8oz (236 ml) squeeze bottle; 12 per case
  • Product #8791: 1-gallon container; 1 per case
840 W 49th Place • Chicago, IL 60609
800.782.8420 • 847.981.9212 • fax 847.981.9278
info@aclstaticide.com • www.aclstaticide.com
ACL, Inc. has been certified by
DQS Inc. to ISO-9001 : 2015
Certificate NO. 10002746