Staticide® 8698 Conformal Coating Remover
Removes a variety of conformal coatings
Staticide® 8698 Conformal Coating Remover quickly and efficiently removes many types of conformal coatings, including acrylic, silicone, and urethane conformal coatings from PCBs and other surfaces. It can be used as precision coating remover for specific areas or as a full immersion bath.
With its fast stripping action, it easily prepares surfaces for solder rework and repair. Staticide® 8698 Conformal Coating Remover will not fade, crack, yellow, or discolor plastics under normal use conditions. It is compatible with most materials used in electrical and electronic assemblies and is compliant with REACH and RoHS.
Ideal for the following applications:
- Medical devices
- Automotive
- Marine
- Aerospace
- Engineering and design equipment
- Process control
FEATURES:
- Flammable
- Safe for most plastic and PCB surfaces
- Evaporates quickly; non-corrosive
- No CFCs or HCFCs
- REACH and RoHS compliant
- Made in the USA
Directions:
Test on a non-critical area to ensure material and product compatibility. Wearing gloves, apply liberally to surface coating and allow to soak. Flood rinse and clean. Use lint-free wipes to help remove conformal coating. Repeat application as needed. Some heat-cured coatings may require immersion and soaking of coated board.
For industrial use only. Read SDS carefully prior to use.
Material Compatibility:
| ABS | Fair |
| Buna-N | Good |
| EPDM | Good |
| Graphite | Good |
| HDPE | Fair |
| Kynar™ | Fair |
| LDPE | Good |
| Lexan™ | Poor |
| Neoprene | Poor |
| Noryl | Fair |
| Nylon™ 66 | Good |
| Cross-linked PE | Good |
| Polypropylene | Fair |
| Polystyrene | Poor |
| PVC | Good |
| Silicone Rubber | Fair |
| Teflon™ | Good |
| Viton™ | Good |
Product Variants / Unit Sizes:
- Product #8698: 11oz (312g) aerosol can; 12 per case
800.782.8420 • 847.981.9212 • fax 847.981.9278
info@aclstaticide.com • www.aclstaticide.com
DQS Inc. to ISO-9001 : 2015
Certificate NO. 10002746